|
 |
Click
here to Listen to a demonstration of the sound emitted from this
Parking Sensor Kit. |
A standard reverse parking sensor kit cannot be fitted to the front of
vehicles because the sensor cable lengths are normally too short to route the
cables safely around the engine bay. The CPU (Control Box) needs to be mounted
somewhere clean and dry, beneath the dashboard. The standard "sensor to CPU"
cable length is 2.4 metres, this kit is supplied with 6 metre cable lengths at no
extra charge.
System Activation
Front Parking Sensor Kit must be operated
via dashboard mounted switch which is
available as optional extra. Please select below.
This
system has a
3-stage audible alert that
gives
audible beeps with increasing frequency as you get closer to an obstacle.
|
Stage |
Distance |
Area |
Sound |
|
1 |
100-150cm |
Safe Mode |
Bi---Bi---Bi |
|
2 |
30-90cm |
Alarm mode |
Bi-Bi-Bi |
|
3 |
0-30cm |
Danger Mode |
Bi------ |
Sensors:
The sensors should be mounted on a vertical surface at 50cm or higher from the
ground.
The sensors are
supplied with optional angled collars that fit between the bumper and sensor to
enable you to angle the face of the sensors away from the ground if you are fitting them to a vehicle with a
curved bumper.
All our sensors are supplied in black. If you want
the sensors colour coded then they can be spray painted using the same paint and
colour as your car.
|
Dimensions:
-
Sensors:
-
Outer Diameter: 25mm.
-
Depth: 23mm.
-
Hole required: 21mm
-
Cable Length:
2.4 metre
|
-
Buzzer:
-
Diameter: 40mm.
-
Depth 18mm.
-
Cable length: 2.4 metre
-
CPU
|
|
Wiring and Installation
The components are supplied pre-plugged
and ready to install, with the exception of the following two wires that
must be connected to the vehicle:
+ Red Wire: Connect to
selected manual or automatic switch.
- Black Wire: Connect to a negative power supply
(Ground/Car Body).
|
This item is in Stock and Next day delivery is available as an option for orders received by 2pm
|
Description
|
Retail
Price including VAT and delivery
within UK
|
Click to Order |
|
Supply C2000L Audible Alert Front only Parking Sensor kit
with 2 recessed sensors. Supply only for DIY
fitting. |
£39.99
including
Delivery & VAT |
|
|
Supply and Install C2000L Audible Alert Front only Parking Sensor kit
with 2 recessed sensors and Manual Round Rocker Switch fully installed at your home or place of work anywhere in England and Wales.
£49.99 payable now with the balance of £100.00 to be paid direct to the Fitter on
completion of the installation.
Click here for more info..... |
£149.99
including
Delivery & VAT |
|
|
Supply, Colour Code and Install C2000L Audible Alert Front only Parking Sensor kit
with 2 recessed sensors and Manual Round Rocker Switch fully installed at your home or place of work anywhere in England and Wales.
£49.99 payable now with the balance of £120.00 to be paid direct to the Fitter on
completion of the installation.
Click here for more info..... |
£169.99
including
Delivery & VAT |
|
The price
you see is the price you pay, there are NO hidden extras. All our prices
include VAT and delivery within the United Kingdom
Please ensure you read our Terms
and Conditions, for estimated delivery times click
here.
Front
Parking Sensor Kit must be operated via dashboard mounted switch or Front Sensor
kit Smart Switch which are available as optional extras:
|
Front Sensor Switch |
Item |
Price |
Order |
|

|
Round
Rocker Switch to manually operate front
Parking Sensors. Dash
mounted switch to enable the manual switching of front parking sensor
kit. Requires 20.4mm hole. Body has a 2mm wide locating lug for which a
slot must be provided in the edge of the hole to prevent rotation.
|
£10.00
including
Delivery & VAT
|
|
C2000L Front Parking Sensor Spares
|
Image |
Description
|
Retail
Price including VAT and delivery
within UK |
Click to Order |
|
 |
21mm
Round Recessed Sensor.
Compatible
with C2000, C2000L, C4000, C4000L & C4M6 kits only
|
£10.00
each
|
|
|
 |
Replacement Buzzer.
Compatible
with C2000, C2000L, C4000, C4000L & C4M6 kits only
|
£10.00
each
|
|
|
 |
Replacement Control Box .
Compatible
with C2000, C2000L, C4000 & C4000L kits only
|
£10.00
each
|
|
|
 |
Set of 21mm Round C2000, C4000 Angled collars .
Compatible
with C2000, C2000L, C4000, C4000L & C4M6 kits only
|
£5.00
pack of 4
|
|
C2000L Photo Gallery
Click on an image to enlarge
|

Sensor with cable |

Sensor - Front |

Sensor - side view |

21mm Hole Saw |
|

Buzzer
|

Angled Collars for
21mm holes
|

CPU
|
|
|

Renault Clio with C4000 kit |

Renault Clio with C4000 kit |

Mercedes C240 Sport with C4000 kit |

Mercedes C Class with C4000 kit |
|

Ford Focus Saloon C4000 kit |

Ford Focus Saloon C4000 kit |

C4000 on Mazda 626 |
|
The price
you see is the price you pay, there are NO hidden extras. All our prices
include VAT and delivery within the United Kingdom
Please ensure you read our Terms
and Conditions, for estimated delivery times click
here.

Ford Mondeo

BMW 320d


Nissan Navara

 |
All our products
conform to EC standards. |
|